Sandblasting booth

A complete range of compressed air blast booths, with total recovery, transport, classification and automatic abrasive cleaning. SPRAYBLAST booths are designed to be installed under roof, protected from rain and humidity, requiring no or minimal civil works. Depending on your work and the type of abrasive used, we can use different collection systems and procedures, which allow us to provide you with the most suitable equipment

• Pick-up over the entire floor surface.
• Partial pick-up by hopper.
• Booths without civil works above ground level.
• Booths for stainless steel treatment
• MONOBLOC booth, self-standing version assembled with all the elements, arrive, connect and start working.

• Pulse Groups.(Inertia).
• Scratchers.(Mechanical drag).
• Worm Screw.
• Towel. (Gravity).
• Pneumatic pickup, etc.

Booths, which allow working with different types of abrasive:

• Metal abrasive.
• Ceramic abrasive.
• Glass ball.
• Stainless grit.
• Corundum, etc.

Cab ventilation is carried out longitudinally. The strong depression created inside absorbs the outside air, which enters the booth through the ventilation intakes and is forced to travel along its entire length, transporting the dust in suspension to the other end being retained on the outside of the filtering cartridges. The cartridges are cleaned by back-pressure compressed air, by means of special injectors and electronically controlled electro-pneumatic valves.

The cartridges are cleaned by back-pressure compressed air, by means of special injectors and electronically controlled electro-pneumatic valves

Booth complete with total collection systems, by means of “SAM” mechanical drag conveyors, with longitudinal movement of scrapers, mounted on two parallel profiles, which including the mechanisms and the walkable grid, do not exceed 150 mm. in height from the “0” level, so the foundation needs are minimal. Made according to the dimensions required by the customer.

A sandblasting booth with total collection by scrapers is the solution to your problems.

A sandblasting booth with total collection by scrapers is the solution to your problems

Booth complete with total collection systems, by means of “TIM” impulse conveyors, with alternative longitudinal movement, based on the principle of inertia, the conveyor tray is mounted on two parallel profiles, which including the mechanisms and the walkable grid, do not exceed 230 mm. in height from the “0” level, so the foundation needs are minimal. Made according to the dimensions required by the customer

Basic, simple and economical system, valid for intermittent workloads.

Cab with partial collection systems, by means of a hopper connected to the elevator by means of a shut-off valve and connecting device.

Abrasive that is outside the surface of the hopper must be shoveled or dragged manually to the hopper.

They are blasting booths similar to the previous ones, with total collection, but designed in such a way that for their installation and operation, no civil works are necessary.

Made according to the dimensions required by the customer. Complete booths, which allow saving the cost and inconveniences of a civil work in installed halls. All the elements of the booth are assembled on zero level.

All the elements of the booth are assembled on zero level

They are blasting booths with total collection, portable and transportable by special truck, equipped with all the necessary elements for a continuous work (cartridge filter, elevator, lighting blasting machine and collection elements on the entire floor surface), connect air, electricity and work. They are made with the following dimensions. From 6 and 12 m. long x 2.5 m. wide and 2.5 m. high (external measurements approx.)

These are special blast booths, made according to the dimensions required by the customer.

Their design, construction, configuration and collection system are determined by: the time of daily use, the type of abrasive to be used, and customer specifications.

Depending on the time of daily use, the type of abrasive to be used, and customer specifications, they incorporate cyclone and special deflectors to prevent abrasive losses.

SPRAYMAQ industrial paint blasting booths, the best solution for your business. The blasting booths for salehere will allow you to get the best benefits from these painting facilities. Go to the contact tab for more information on prices to buy

A wide range of motorized equipment, equipped with special elements and filters for filtration of paint particles, dust, metallization, etc. Cartridge filters of modular construction using galvanized sheet metal panels, forming a light and hermetic resistant box, mounted on hoppers and painted metal legs.

The replacement of cartridges and injectors is easily done from the outside. The motor is placed on the floor so that the vibrations or the weight cannot damage the filtering housing.

A programmable PLC, allows the control of cycles, times and depression, as well as it indicates the anomalies of operation of electro-valves and the saturation of the filters. The filtering group is composed of two zones, clean or upper and dirty or lower. The dusty air is sucked in through the mouth of the lower zone, which, due to the depression created by the fan, conducts it through the cartridges that filter the air to the clean zone, from where it is evacuated to the outside. The dust retained in the cartridges is cleaned and descaled from the filtering element by means of compressed air at counterpressure which deposits it in the hopper in the lower zone, from where it goes directly to a bag for its disposal

Complete range of fans, standard low and medium power versions, heavy duty fans, special fans for large flows and depressions, so that they can solve any type of filtration and ventilation of enclosures and industrial buildings, so that they allow the evacuation of air to the outside in compliance with current particle emission regulations

Filtering boxes equipped with filtering blankets, cartridges, bag filters or active carbon filters that allow solving problems of recirculation, filtration, renovation and adequacy of facilities and workplaces, meeting quality and comfort standards.

In the industrial field, proper surface preparation plays a crucial role in the quality and durability of manufactured products. One highly effective technique for achieving flawless surfaces is sandblasting. This process, also known as sandblasting or shot blasting, employs abrasive particles blasted at high velocity to remove rust, old paint, scale and dirt, leaving surfaces ready for further treatment. In this section, we will explore in detail how sandblasting works and its effectiveness in a variety of industrial applications

The key to a successful blasting process lies in the use of specially designed booths. These booths, like the ones we offer at Spraymaq, ensure blast containment and prevent the dispersion of abrasive particles into the environment. With options of complete or partial collection by hopper, our booths are adapted to the specific needs of each job. In addition, our booths without civil works above ground level offer quick and easy installation, which increases efficiency in any operation

In industry, stainless steel is widely used in the manufacture of medical equipment, household appliances and industrial components due to its strength and durability. However, to ensure an optimal finish and remove impurities, it is essential to subject it to a sandblasting treatment. Our advanced technology and specialized booths ensure thorough cleaning, leaving stainless steel surfaces smooth, homogeneous and free of contaminants, ready for use in high quality products

Rust and corrosion can be the main enemies of the integrity of metal structures and components. However, thanks to sandblasting, it is possible to remove rust and corrosion, restoring strength and prolonging the service life of the affected elements. At Spraymaq, our sandblasting equipment guarantees effective rust and corrosion removal, which contributes to the recovery of parts and the reduction of replacement costs

Sandblasting is the versatile and effective solution your industry needs to prepare surfaces and guarantee the quality of your products. At Spraymaq, we have the advanced technology and specialized booths that ensure optimal results in stainless steel treatment, paint preparation and rust and corrosion removal. Don’t miss the opportunity to improve the efficiency and quality of your industrial processes! Contact us today for personalized advice and find out how our sandblasting can take your business to the next level – rely on our expertise and technology to achieve exceptional results!

In addition to sandblasting booths we also have